Door Stash Tube (white PLA plastic)
1 pair of Door Stash Tubes (white PLA plastic)
A G3D original design and part of our Stash series of products.
Made to be installed inside any hollow interior door. Drill a 1" diameter hold in the top of the door to the depth of the lip of the cap (approx. 1/4"). Then use a 3/4" drill bit to drill down the center of the same hold into the hollow interior of the door. The holes must be cleaned out by reaming with the bit or using a bit of sand paper or a file. The tube should slip in and out easily.
Fill the tuber with money or other valuables and pop it into the hold. There is a magnet glued into the top of the tube so that your can use any metal object like a knife to reach above the door and remove the tube.
Visit us on Instagram @g3d_printables for more pictures and videos.
Dimensions:
- Tube - 4" long, 0.75" inner diameter, 0.5" outer diameter
Includes:
- (2) tubes
- (2) screw tops with magnetic inserts
- G3D Maker's coin
A G3D original design and part of our Stash series of products.
Made to be installed inside any hollow interior door. Drill a 1" diameter hold in the top of the door to the depth of the lip of the cap (approx. 1/4"). Then use a 3/4" drill bit to drill down the center of the same hold into the hollow interior of the door. The holes must be cleaned out by reaming with the bit or using a bit of sand paper or a file. The tube should slip in and out easily.
Fill the tuber with money or other valuables and pop it into the hold. There is a magnet glued into the top of the tube so that your can use any metal object like a knife to reach above the door and remove the tube.
Visit us on Instagram @g3d_printables for more pictures and videos.
Dimensions:
- Tube - 4" long, 0.75" inner diameter, 0.5" outer diameter
Includes:
- (2) tubes
- (2) screw tops with magnetic inserts
- G3D Maker's coin
S3Xz8Jq
New
4
